| |
|
| |
Check for an active "RD"
(Ready) light on the controller |
| |
Cycle power to remote
controller
(cycle power only at the remote site not at the local / host site) |
| |
- wait and see if the stations come up at this point
- you may have to vary off then on the stations at the remote
location
|
| |
All workstations and printers should be working now |
| |
If
the stations still won't respond continue to recovery attempt 2 |
| |
|
| |
|
| |
Vary off workstations |
| |
Vary off controller |
| |
Cycle power to the remote controller |
| |
Wait for the solid green "RD" light to come appear
- The following lights should be solid green
TD RD
ACT LNK
x x
x x
|
| |
Vary on controller |
| |
Vary on workstations & printers |
| |
All workstations and printers should be working now |
| |
|
| |
|
| |
|
| |
|
